[ 3 ] About "$$Brklst.sys - Denso BHT-8000 User Manual

Scandisk when the resume function is enabled
If Scandisk runs when the resume function is enabled, the screen given below may appear. The screen
may also appear when the calendar clock built in the BHT stops, even without running Scandisk.
The BHT displays the screen for three seconds and then automatically runs the execution program from
the beginning.
[ 3 ] About "$$BRKLST.SYS"
If Scandisk finds an invalid file(s), it will automatically create the "$$BRKLST.SYS" file. To check the
contents of the file, upload the file in System Mode to the host computer. (Refer to Subsection 2.5.3, "[ 3 ]
Uploading.")
Contents of the "$$BRKLST.SYS" file
Records (1) File name
(2) Error factor
(3) Broken records
(Example)
SAMPLE1.DAT + 01000-01050
SAMPLE1.DAT + 01200-01250
SAMPLE1.DAT + 01600-01650
SAMPLE2.DAT * 00250-00275
SAMPLE3.DAT * 00100-00150
↑ ↑
(1) (2)
+ (Broken since the BHT has not been turned off normally)
* (Broken due to any other causes)
e.g. 01000-01200 (Data in records numbered 1000 to 1200 is lost)
If more than one sequence of records is broken in a same file, they
will be written into the subsequent records in the
"$$BRKLST.SYS."
↑
(3)
Chapter 2 Getting Started the BHT and System Mode
31