Denso BHT-8000 User Manual page 65

Upload screens
⇓
⇓
⇓
If you select "1:ONE FILE" and choose a file to be uploaded or if you
select the "2:ALL FILES" or "3:HT<-->HT COPY" on the UPLOAD
menu, then the screen shown at left will appear.
If you select "2:ALL FILES" or "3:HT<-->HT COPY," the "ALL" or
"HT<-->HT" will appear in the center of the 2nd line, respectively.
Showing this screen, the BHT waits for a file(s) to be uploaded.
Upon start of optional Ir-Transfer Utility C/Ir-Transfer Utility E/Transfer
Utility or equivalent program (upon receipt of an ACK code from the
host computer), the BHT displays the screen shown at left.
(Refer to the "Ir-Transfer Utility C Guide"/"Ir-Transfer Utility E
Guide"/"Transfer Utility Guide.")
While the uploading operation is in progress, the screen shown at left
is displayed indicating the file name and the number of sent
records/the total number of records.
To abort the uploading operation, press the C key. The screen will
switch back to the UPLOAD menu.
Upon completion of uploading, the number of sent records becomes
equal to the total number of records and the beeper beeps once.
Press the C key to return to the UPLOAD menu.
If you have selected "2:ALL FILES" or "3:HT<-->HT COPY" on the
UPLOAD menu, a sequence of the above screens will be repeated by
the number of files to be uploaded.
Chapter 2 Getting Started the BHT and System Mode
49