Denso BHT-8000 User Manual page 27

Ir-Transfer Utility E (option)
Running on the host computer, this utility transfers files between the BHT and the host computer. For its
file transfer control procedure, the utility uses the BHT-Ir protocol. (For the details about the BHT-Ir
protocol, refer to Chapter 3, Subsection 3.4.2.)
To transfer files under any of the following conditions, use Ir-Transfer Utility E:
- Via an external IR transceiver
- Via an IrDA interface port integrated in a computer
Transfer Utility (option)
Running on the host computer, this utility transfers files between the BHT and the host computer. It uses
the BHT-protocol as a file transfer control procedure. (For the details about the BHT-protocol, refer to
Chapter 3, Subsection 3.4.1.)
To transfer files under any of the following conditions, use Transfer Utility:
- When the BHT is placed on the CU-8000
- Via the direct-connect interface of the BHT
Chapter 2 Getting Started the BHT and System Mode
11