Denso BHT-8000 User Manual page 56

In addition to the functions given on the preceding pages, System Mode has these five functions:
Deleting program/data files, Deleting font files, Downloading/uploading the BHT system parameter file,
Setting the remote wakeup parameters, and Downloading/uploading the system message file.
To call up these functions, press the 0, 2, 3, 4 or 6 key, respectively, while holding down the SF key
when the SYSTEM MENU is displayed.
0 with SF
held down
2 with SF
held down
3 with SF
held down
C key
4 with SF
held down
6 with SF
held down
SYSTEM MENU ← Press the PW key while holding down the SF and
1 keys.
Deleting files
Deletes a program file or data file stored in
the memory.
(Refer to Subsection 2.5.3, [ 7 ].)
Deleting font files
Deletes a font file stored in the memory.
(Refer to Subsection 2.5.3, [ 8 ].)
Downloading/uploading the BHT
system parameter file
Downloads or uploads the system
parameter file.
(Refer to Subsection 2.5.3, [ 9 ].)
Setting the remote wakeup parameters
Sets the remote wakeup parameters.
(Refer to Subsection 2.5.3, [ 10 ].)
Downloading/uploading the system
message file
Downloads or uploads the system
message file.
(Refer to Subsection 2.5.3, [ 11 ].)
40