Table of Contents
Advertisement
Troubleshooting
The device is operating in Safe Mode. Some print options may be disabled or
provide unexpected results.
Touch Continue on the control panel to clear the message and continue printing.
Too many flash options installed [58]
Try one or more of the following:
•
Touch Continue on the control panel to continue printing.
•
Remove the extra flash memory:
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Remove the extra flash memory.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
Too many trays attached [58]
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Remove the extra trays.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
Tray [x] paper size unsupported
Replace with a supported paper size.
Unformatted flash detected [53]
Try one or more of the following:
•
From the printer control panel, touch Continue to stop the defragmentation and continue printing.
•
Format the flash memory.
Note: If the error message remains, then the flash memory may be defective and needs to be replaced.
Unsupported disk
Remove the unsupported printer hard disk, and then insert a supported one.
198
Advertisement
Table of Contents
