Table of Contents
Advertisement
Understanding the printer menus
Use
Rough Envelope Texture
Rough
Letterhead Texture
Smooth
Normal
Rough
Preprinted Texture
Smooth
Normal
Rough
Colored Texture
Smooth
Normal
Rough
Light Texture
Smooth
Normal
Rough
Heavy Texture
Smooth
Normal
Rough
Rough/Cotton Texture
Rough
Custom [x] Texture
Smooth
Normal
Rough
Paper Loading menu
Use
Card Stock Loading
Duplex
Off
Notes:
•
Off is the factory default setting for all Paper Loading menu selections.
•
Duplex sets the printer default to two‑sided printing for every print job unless one‑sided printing is selected from
Print Properties or the print dialog, depending on your operating system.
To
Specify the relative texture of the rough envelopes loaded.
Specify the relative texture of the letterhead loaded.
Note: Normal is the factory default setting.
Specify the relative texture of the preprinted paper loaded.
Note: Normal is the factory default setting.
Specify the relative texture of the colored paper loaded.
Note: Normal is the factory default setting.
Specify the relative texture of the paper loaded.
Note: Normal is the factory default setting.
Specify the relative texture of the paper loaded.
Note: Normal is the factory default setting.
Specify the relative texture of the cotton paper loaded.
Specify the relative texture of the custom paper loaded.
Notes:
•
Normal is the factory default setting.
•
The options appear only if the custom type is supported.
To
Determine and set two-sided printing for all print jobs with Card Stock
as the paper type.
76
Advertisement
Table of Contents
