Table of Contents
Advertisement
Additional printer setup
To install a hard disk onto the ISP:
a
Remove the screws attached to the hard disk mounting bracket, and then remove the bracket.
b
Align the standoffs of the hard disk to the holes in the ISP, and then press the hard disk down until the standoffs
are in place.
Installation warning: Hold the hard disk by its edges. Touching or pressing on the center of the hard disk
may damage it.
c
Insert the plug of the hard disk interface cable into the receptacle of the ISP.
Note: The plugs and receptacles are color‑coded.
30
Advertisement
Table of Contents
