Ordering A 300K Maintenance Kit; Storing Parts And Supplies - Lexmark MS910 Series User Manual

Maintaining the printer
Ordering staple cartridges
Item
Staple cartridges

Ordering a 300K maintenance kit

Note: To replace the parts included in the maintenance kit, see the instruction sheet that came with each part.
Item
Maintenance kit

Storing parts and supplies

Storing supplies
Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you
are ready to use them.
Do not expose supplies to:
•
Direct sunlight
•
Temperatures above 35°C (95°F)
•
High humidity above 80%
•
Salty air
• Corrosive gases
•
Heavy dust
Storing the rollers
Your printer comes with replacement rollers stored in the compartment inside the standard trays. After you purchase
new rollers, make sure to store them in the compartments inside the trays.
Note: For proper disposal of parts and supplies, see
Part number
25A0013
"Recycling" on page 124.
Part number
40X9669
135