Table of Contents
Advertisement
Understanding the printer menus
Use
Timeouts
Hibernate Timeout
Disabled
1 hour
2 hours
3 hours
6 hours
1 day
2 days
3 days
1 week
2 weeks
1 month
Timeouts
Hibernate Timeout on Connection
Do Not Hibernate
Hibernate
Timeouts
Screen Timeout
15–300 sec
Timeouts
Prolong Screen Timeout
On
Off
Timeouts
Print Timeout
Disabled
1–255 sec
Timeouts
Wait Timeout
Disabled
15–65535 sec
To
Set the amount of time before the printer enters Hibernate mode.
Note: 3 days is the factory default setting.
Set the printer to Hibernate Timeout even when there is an active
Ethernet connection.
Note: Hibernate is the factory default setting.
Set the amount of time in seconds the printer waits before
returning to Ready state.
Note: 30 sec is the factory default setting.
Set the printer to continue a specified job without returning to the
home screen when the screen timeout timer expires.
Note: Off is the factory default setting.
Set the amount of time in seconds the printer waits to receive an
end‑of‑job message before canceling the rest of the print job.
Notes:
•
90 sec is the factory default setting.
•
When the timer expires, any partially printed page still in the
printer is printed, and then the printer checks to see if any
new print jobs are waiting.
•
Print Timeout is available only when using PCL emulation.
This setting has no effect on PostScript emulation print jobs.
Set the amount of time in seconds the printer waits for additional
data before canceling a print job.
Notes:
•
40 sec is the factory default setting.
•
Wait Timeout is available only when the printer is using
PostScript emulation. This setting has no effect on PCL
emulation print jobs.
104
Advertisement
Table of Contents
