Table of Contents
Advertisement
Troubleshooting
•
Touch Reset active bin to reset the active bin for a linked set of bins.
•
Cancel the print job.
Insert hole punch box
Insert the hole punch box into the finisher, and then touch Continue to clear the message.
Insert Tray [x]
Try one or more of the following:
•
Insert the specified tray into the printer.
•
Cancel the print job.
•
Reset the active bin for a linked set of bins by selecting Reset active bin on the printer control panel.
Insufficient memory for Flash Memory Defragment operation [37]
Try one or more of the following:
•
From the printer control panel, touch Continue to stop the defragmentation and continue printing.
•
Delete fonts, macros, and other data in the printer memory.
•
Install additional printer memory.
Insufficient memory to collate job [37]
Try one or more of the following:
•
From the printer control panel, touch Continue to print the part of the job already stored and begin collating the
rest of the print job.
•
Cancel the current print job.
Insufficient memory to support Resource Save feature [35]
Install additional printer memory or touch Continue to disable Resource Save, clear the message, and continue printing.
Insufficient memory, some Held Jobs were deleted [37]
From the printer control panel, touch Continue to clear the message.
Insufficient memory, some held jobs will not be restored [37]
Try one or more of the following:
•
From the printer control panel, touch Continue to clear the message.
•
Delete other held jobs to free up additional printer memory.
189
Advertisement
Table of Contents
