Table of Contents
Advertisement
Understanding the printer menus
Use
Log Action at End of Frequency
None
E‑mail Current Log
E‑mail & Delete Current Log
Post Current Log
Post & Delete Current Log
Log Near Full Level
Off
1–99
Log Action at Near Full
None
E‑mail Current Log
E‑mail & Delete Current Log
E‑mail & Delete Oldest Log
Post Current Log
Post & Delete Current Log
Post & Delete Oldest Log
Delete Current Log
Delete Oldest Log
Delete All Logs
Delete All But Current
Log Action at Full
None
E‑mail & Delete Current Log
E‑mail & Delete Oldest Log
Post & Delete Current Log
Post & Delete Oldest Log
Delete Current Log
Delete Oldest Log
Delete All Logs
Delete All But Current
URL to Post Logs
E‑mail Address to Send Logs
Log File Prefix
To
Determine and set how the printer responds when the frequency threshold expires.
Note: None is the factory default setting.
Specify the maximum size of the log file before the printer executes the Log Action
at Near Full.
Note: 5 is the factory default setting.
Determine and set how the printer responds when the hard disk is nearly full.
Notes:
•
None is the factory default setting.
•
The value defined in Log Near Full Level determines when this action is
triggered.
Determine and set how the printer responds when disk usage reaches the maximum
limit (100MB).
Note: None is the factory default setting.
Determine and set where the printer posts job accounting logs.
Specify the e‑mail address to which the printer sends job accounting logs.
Specify the prefix you want for the log file name.
Note: The current host name defined in the TCP/IP menu is used as the default log
file prefix.
114
Advertisement
Table of Contents
