Disassembly/Assembly Procedure; Identification Of Exterior Parts And Removal Procedures For Them - Konica Minolta bizhub 160f Service Manual

6. Other
6.3

Disassembly/Assembly procedure

6.3.1

Identification of Exterior Parts and Removal Procedures for Them

5
No. Name
1 Original Cover
2 Exit tray
3 Front Door
4 Tray1
(with Bypass Tray)
5 Left Cover
6 Right Cover
7 Rear Cover
32
6
7
Open the Original Cover → Pull it straight up.
While pressing out one side, remove the Exit tray.
Open the Front Door. → While pressing in one side, remove the
Front Door.
Hold down the main unit with one hand and pull Tray1 off toward
you.
Open the Front Door. → Remove the screw, unhook the six tabs,
and remove the Left Cover.
Open the Front Door. → Remove the two screws, unhook the four
tabs, and remove the Right Cover.
Remove the five screws, and remove the Rear Cover.
Confidential – for internal use only, do not distribute
Field Service Ver. 1.0 Apr. 2005
1
2
3
4
C4980o003AC
Removal Procedure
C4980o057AB