High Voltage Unit; Ir Unit - Konica Minolta bizhub 160f Service Manual

6. Other
6.3.11

High Voltage Unit

1. Remove the Power Unit Assy.
☞ 39
6.3.12

IR Unit

1. Remove the Left Cover.
☞ 32
2. Remove the Right Cover.
☞ 32
3. Remove the Rear Cover.
☞ 32
4. Remove the PCL Board. (bizhub 161/161f only).
☞ 35
42
4136D002AB
4136D003AB
4980D007AA
4980D006AA
Confidential – for internal use only, do not distribute
Field Service Ver. 1.0 Apr. 2005
32. Remove four screws.
33. Remove the Power Unit.
2. Remove one screw.
3. Remove the High Voltage Unit.
5. Unplug the connector.
6. Unplug the two flat cables from the
Controller/Mechanical Control
Board.
NOTE
• Be extremely careful not to break
the flat cables.