Konica Minolta bizhub 160f Service Manual page 128

Field Service Ver. 1.0 Apr. 2005
C. GATEWAY
Functions / Use • This function is used to specify the default gateway (IP address) of a router on
NOTE
• Available only if the NIC NC-501 is installed.
• Please consult customer's network administrator for information about
Setting/Procedure • Setting LAN address.
NOTE
• If Auto is selected for "1 IP Address/Auto," the items of "2 Subnet mask"
D. DNS CONFIG.
Functions / Use • This function is used to enable or disable the DNS (Domain Name System) set-
• *If the DNS server is located within your local network, select Enable. If you are
NOTE
• Available only if the Internet Fax & Network Scan Kit SU-502 is installed.
• Please consult customer's network administrator for details.
Setting/Procedure • The default setting is "DISABLE."
• If DISABLE is selected, the NETWORK SETTING screen appears.
• If ENABLE is selected, the screen for entering the IP address of the DNS server
E. GATEWAY TX
Functions / Use • This function is used to enable the Direct Fax function.
NOTE
• Available only if the Internet Fax & Network Scan Kit SU-502 is installed.
Setting/Procedure • The default setting is "DISABLE."
Confidential – for internal use only, do not distribute
the network.
the gateway to use.
and "3 Gateway" are automatically set. Key entry is therefore disabled for
"2 Subnet mask" and "3 Gateway."
ting. If there is a DNS server on your network, enter the IP address of the DNS
server.
using the DNS server of an Internet service provider (ISP) or some other DNS
server located outside your local network, select Disable.
"DISABLE"
appears.
"DISABLE"
10. Utility Mode (bizhub 160f/bizhub 161f)
ENABLE
ENABLE
95