Fax Error (Bizhub 160F/Bizhub 161F Only); Communication Error; Outline; Error Occurring During Transmission - Konica Minolta bizhub 160f Service Manual

23. FAX error (bizhub 160f/bizhub 161f only)

23. FAX error (bizhub 160f/bizhub 161f only)

23.1 Communication Error

23.1.1

Outline

• Error caused by a problem of communication functioning. Five possible causes of errors
are:
1. Communication is discontinued by a machine error.
2. Communication is discontinued by a machine trouble.
3. Communication is discontinued by an error occurring at the destination station.
4. Communication is discontinued by a protocol error.
5. ADF Error on trouble.
• When communication is discontinued due to item 3 or 4, transmission is retried. In other
case, transmission is canceled without retry.
23.1.2

Error occurring during transmission

• The transmission error before "Phase-B" performs redial according to the redial interval
of each country and the number of times.
The transmission error after "Phase-C" performs redial only one time. Transmission is
canceled when an error occurs again. (can change in Soft SW)
When an error occurs by ADF TX, transmission is canceled without redial.
This machine
(Transmission)
[START]
key press
23.1.3

Error occurring during reception

• Reception is canceled.
270
Confidential – for internal use only, do not distribute
Field Service Ver. 1.0 Apr. 2005
G3 machine
(Receiving)
R side start
4980P513AA
Phase
4980o512AA