Konica Minolta bizhub 160f Service Manual page 112

Field Service Ver. 1.0 Apr. 2005
NOTE
Precautions for Changing the Setting of ADMIN. MANAGEMENT/REMOTE MONITOR
If the user machine setting has been changed from "LIMITED" to "FULL" or vice
versa while RSD (Remote Setup Diagnostic) communication is established, perform
the following operations:
• Temporarily disconnect the communication and re-execute "Remote Connect."
• Press the "Disconnect" key to disconnect the communication.
• The specific changes made in the setting of REMOTE MONITOR are not validated
unless the connection is made again.
< Precautions for Using the RSD (Remote Setup Diagnostic)>
• When a connection is established with a local machine using the RSD, the follow-
ing message appears on the Display and no operations can be made from the
"Control Panel" of the local machine. Neither the PC print nor Scanner function
can be accepted.
• No connection can be made with the RSD during operation from the "Control
Panel" of the local machine. Make the connection while no operations are per-
formed on the local machine.
• As is the case with the RSD, operations from the "Control Panel" of the local
machine, PC print, and Scanner function are not accepted while a connection is
being established with the local machine using the LSD (Local Setup Diagnostic)
and Page Scope Web Connection/Admin. mode.
• As is the case with the RSD, no connection can be made with LSD and Page Scope
Web Connection/Admin. mode during operation from the "Control Panel" of the
local machine. Make the connection while no operations are performed on the
local machine.
Confidential – for internal use only, do not distribute
10. Utility Mode (bizhub 160f/bizhub 161f)
4980P533AA
4980P534AA
79