Variable Loading Floor In The Luggage Compartment - Skoda Superb Owner's Manual

88 Seats and Stowage
Automatic foldable luggage compartment cover (Combi)
The automatic rolling up of the foldable luggage compartment cover
enables an easier entry into the luggage compartment.
– Open the boot lid/luggage compartment door. The foldable luggage compart-
ment cover rolls up automatically in the position
– The cover rolls up fully by pressing the cover in the handle area in direction of
A
arrow .
3
When the boot lid is opened quickly, the automatic rolling up of the foldable luggage
compartment cover is blocked for a delay time of approx. 2 seconds.
The function of the automatic rolling up of the foldable luggage compartment cover
can be activated/deactivated in the information display in the menu:
Settings

Autom. blind

WARNING
No objects should be placed on the luggage compartment cover.
Removing the variable loading floor in the luggage compartment
Fig. 87 Luggage compartment: Remove variable loading floor/remove carrier rails
The variable loading floor makes handling of bulky items of luggage easier. You can
remove the variable loading floor if necessary.
– Unlock the variable loading floor by turning the safety eyes
left by around 90°.
–
–
A  page 87, fig.
to 86.
1
The maximum load of the variable loading floor is 75 kg.
Divide the luggage compartment with variable loading floor
The boot can be divided with the variable loading floor.
–

Variable loading floor in the luggage compartment

(Combi)
Introduction
A  fig. 87 to the
A
The variable loading floor makes handling of bulky items of luggage easier.
Fold together the loading floor and take it out by moving in direction of arrow.
A
Unlock the carrier rails by turning the arbor-mounted fixing eyes
B
right by approx. 90°.
WARNING
Pay attention when installing the variable loading floor that the carrier rails and
the variable loading floor are correctly attached. If this is not the case, there is a
risk of injury for the occupants.
Caution
Lift up the part with the holder and secure it by sliding it into the grooves
 fig.
88.
A
to the
C
Fig. 88 Luggage compartment: Dividing
the luggage compartment with variable
loading floor