Variable Loading Floor In The Luggage Compartment (Estate); Multifunction Pocket; Class N1 Vehicles - Skoda octavia Owner's Manual

Hide thumbs Also See for octavia:
Table of Contents

Advertisement

Multifunction pocket

Fig. 116 Multifunction pocket: pull out/insert/push in/remove
Read and observe
and
The multifunction pocket (hereinafter referred to only as pocket) is provided
for storing clothing and light objects with no sharp edges.
The maximum permissible load of the multifunction box is 3 kg.
Removal and fitting
Fold down the front hooks on both sides of the luggage compartment in the
direction of arrow
» fig.
116.
1
Grasp the rear bar
with both hands and withdraw the pocket in the direc-
A
tion of the arrow
.
2
Place the rear bar onto the two hooks that are folded forward in the direc-
tion of the arrow
all the way to the stop.
3
Pushing in
Remove the rear bar of the hook in direction of arrow
in the direction of arrow
» fig.
5
on page 93 first.
push in the pocket
4
116.
Place the rear bar against the front bar and press them together at both
ends
.
B
Fold back the front hooks on both sides of the luggage compartment oppo-
site the direction of the arrow
Removing/fitting
Remove the roll-up cover
» page
Remove the pocket from the fittings in the direction of the arrow
» fig.
116.
It is fitted in reverse order.
Insert the end of the bar marked within the right-hand mounting and the
end of the bar marked with in the left-hand mounting. The arrows should
be pointing forward.

Class N1 vehicles

Read and observe
and
In class N1 vehicles that are not fitted with a protective grille, a lashing set that
complies with the EN 12195 standard (1-4) must be used for fastening the load.
Proper functioning of the electrical installation is essential for safe vehicle op-
eration. It is important to ensure that the electrical installation is not damaged
during the adjustment process or when the storage area is being loaded and
unloaded.

Variable loading floor in the luggage compartment (Estate)

Introduction
This chapter contains information on the following subjects:
Positions of the variable loading floor
Fold together / fold out the variable loading floor
Dividing the boot
.
1
97.
on page 93 first.
Transport of cargo
6
100
100
101
99

Advertisement

Table of Contents
loading

Table of Contents