240
Fuses and light bulbs
–
Carefully take out the lamp. Do not pull the grommet with the cables out of the
body.
–
When re-installing, first insert the rear light unit with the openings
studs in the body.
–
Press the rear light unit down into the body until it is heard to lock in place.
–
Screw the rear light unit tight and press in the plugs.
A
A
A
Changing bulbs
,
and
1
3
–
Turn the socket with the bulb to the left up to the stop and take it out of its
housing.
–
Remove the defective bulb from the socket and insert a new bulb into the
socket.
–
Insert the socket with the new bulb into the housing and turn it to the right up
to the stop.
A
A
Changing bulbs
and
in the rear light unit
2
4
–
Turn the socket with the bulb to the left up to the stop and take it out of its
housing.
–
Press in the defective bulb, turn it to the left up to the stop and take it out.
–
Insert a new bulb into the socket, press it in and turn the bulb to the right up to
the stop.
–
Insert the socket with the new bulb into the housing and turn it to the right up
to the stop.
page 239, fig.
Fitting position of the bulbs
A
- Parking lights/Reversing light
1
A
- Reversing light
2
A
- Turn signal lights
3
A
- Parking lights/Brake light
4
A
- parking lights
5
19)
The torx wrench is located in the vehicle toolkit box.
in the rear light unit
5
221.
Caution
When removing and installing the rear light unit make sure not to damage the paint-
A
onto the
A
work of the vehicle and the rear light unit.
Licence plate light
–
Unscrew the glass cover of the light
–
Take the defective bulb out of the holder and insert a new one.
–
Replace the the glass cover of the light and press it down to the stop - ensure
that the glass cover is correctly installed.
–
Screw the glass cover tight.
Licence plate light (Combi)
Fig. 222 Rear bumper: Licence plate light
fig.
222.
Fig. 223 Luggage compartment door
Licence plate light