Exterior Mirror - Skoda Superb Owner's Manual

Switching on the automatic dimming
– Press the button A  page 74, fig.
B
Switching off the automatic dimming
A
– Press again the button
B
If the automatic dimming is switched on, the mirror dims automatically depending
on the light striking the mirror from the rear. The mirror has no lever on the bottom
edge of the mirror. After the reverse gear is engaged, the mirror always moves back
into the normal position.
Note

Automatic mirror dimming operates only properly if the sun screen for the rear
window in the housing on the luggage compartment cover is not in use or the light
striking the interior rear-view mirror is not affected by other objects.

Do not affix any stickers in front of the light sensor, so that you do not impair
the automatic dimming function or put it out of operation.

If you switch off the automatic dimming interior rear-view mirror, also the exte-
rior mirror dimming is switched off.

Exterior mirror

You can adjust the exterior mirrors electrically.
Adjust the rear mirror before commencing to drive so that there is a clear view to
the rear.
The exterior mirror heater only operates when the engine is running and up to an
outside temperature of +20 °C.
Using the system Safety
67, the warning light A lights up.
A
A
- the warning light goes out .
A
Fig. 68 Inner part of door: Rotary knob
Driving Tips
It is only possible to fold in both exterior mirrors when the ignition is switched on
and at a speed of up to 15 km/h.
Heating of the external mirror
– Turn the rotary knob to position
Adjusting left and right exterior mirrors simultaneously
– Turn the rotary knob to position
tical to the movement of the rotary knob.
The adjustment of both mirrors simultaneously or each individual mirror is possible
in the Information display  table on page 25 in the menu point Mirror adjust.
(Mirror adjust.).
Adjusting the right-hand exterior mirror
– Turn the rotary knob to position
tical to the movement of the rotary knob.
Switching off operating control
– Turn the rotary knob to position
Folding in both exterior mirrors
– Turn the rotary knob to position
Fold in the exterior mirrors using the remote control key
– If all the windows are closed, press the unlock button
the radio remote control for approx. 2 seconds.
Tilting surface of front passenger exterior mirror
When the rotary knob is in position
surface of the mirror tilts down slightly. This provides an aid in seeing the kerb of
the pavement when parking the car.
The mirror returns into its initial position, after the rotary knob is moved out of the
position  and put into another position or if the speed is more than 15 km/h.
Memory for exterior mirrors
On vehicles fitted with a memory for the driver seat, the relevant setting of the
exterior mirror is also stored automatically when the seat position is stored
 page 79.
General Maintenance Breakdown assistance
Lights and Visibility
 fig.
 68.
 . The movement of the mirror surface is iden-
 . The movement of the mirror surface is iden-
 .

.
A  page 49, fig. 38
3
  fig. 68 and the reverse gear is engaged, the
Technical Data
75
on