Skoda Superb Owner's Manual page 91

90 Seats and Stowage
Fig. 92 Luggage compartment: remove variable loading floor
You can remove and reinstall the variable loading floor, if necessary.
Removing the variable loading floor
– Grasp the rear part of the floor at the handle, raise it slightly in direction of arrow
 page 89, fig. 91
A at and pull it over the bumper in direction of arrow
1
A  fig.
it engages in the opening
C
– You can fold together the loading floor by moving it in direction of arrow
 page 89, fig.
91.
A  fig. 92
– Press the safety buttons
A
Installing the variable loading floor
– Fold together the floor and place it on the carrier rail.
– Push the floor forwards until it engages in the openings
carrier rails.
– Carefully press on the points of the openings
lock in place, if necessary press the safety buttons
WARNING
Pay attention when installing the variable loading floor that it is correctly
attached. If this is not the case, there is a risk of injury for the occupants.
A
92.
and remove the floor.
A  fig. 92 in the
B
A on the floor until it is heard to
C
A
.
A
Fixing set (Combi)
Fig. 93 Telescopic pole and tensioning strap
The fixing set can be used for dividing the luggage compartment or for securing the
objects which are being transported.
until
2
Telescopic pole
– Insert the holder for the telescopic pole on the left and right into the openings
A
3
of the carrier rails.
– Press the top part of the holder in direction of arrow
the same time in the desired position, arrow
– Ensure that the holder is correctly interlocked.
Tensioning strap
– Insert the holder of the tensioning strap into the opening of the left or right
carrier rail.
– Press the holder in direction of arrow
in the desired position, arrow
– Ensure that the holder is correctly interlocked.
– Place the object which should be fastened behind the tensioning strap.
A
– Press the button
5
WARNING
The objects in the luggage compartment must be firmly secured with the fixing
set so that they cannot move freely and uncontrollably in order to prevent
damage to objects or injuries to the occupants.
A  fig. 93
1
A
.
2
A
 fig. 93 and push it at the same time
3
A
.
4
on the top side of the holder and tighten the strap.
and push it at