Skoda Superb Owner's Manual page 231

230 Breakdown assistance
Rear towing eye
Fig. 209 Rear bumper: Removing the cover/installing the towing eye
– Press onto the bottom part of the cover in the rear bumper
take it out.
– Screw in the towing eye by hand to the left up to the stop
tighten it as much as possible. For tightening, we recommend that you use for
example the wheel wrench, the lashing eye of another vehicle or a similar object
which you can push through the eye.
– Put the cover in place after screwing out the towing eye again and press into
place. The cover must engage firmly.
Caution
The towing eye must always be screwed in fully and firmly tightened, otherwise the
towing eye can tear when towing in or tow-starting!
 fig. 209
- left and
 fig. 209
- right and