Removing The Fixing Delivery/Paper Width Sensor Pcb; Preparation; Procedure - Canon M3010 Series Service Manual

4
Disassembly/Assembly > Controller System > Removing the Fixing Delivery/Paper Width Sensor PCB > Procedure

Removing the Fixing Delivery/Paper Width Sensor PCB

■ Preparation

1) Remove the Left Cover.(Refer to page 4-13)
2) Remove the Reader Unit.(Refer to page 4-20)
3) Remove the Right Cover.(Refer to page 4-14)
4) Remove the Front Cover Unit.(Refer to page 4-15)
5) Remove the Upper Cover.(Refer to page 4-15)
6) Remove the Rear Cover.(Refer to page 4-17)
7) Remove the Main Controller PCB.(Refer to page 4-34)

■ Procedure

1) Remove the Main Controller PCB Installation Plate [1].
• 1 Screw (with washer) [2]
• 2 Screws (black TP) [3]
• 1 Hook [4]
x3
[4]
4 Disassembly/Assembly > Controller System > Removing the Fixing Delivery/Paper Width Sensor PCB > Procedure
[1]
[3] [2]
F-4-96
2) Remove the terminal [1], and free the harness [2] from the Harness Guide [A].
3) Remove the Harness Retaining Spring [3] from the 2 hooks [B].
[A]
[2] [1]
4) Disconnect the 4 connectors [1].
x4
4-40
[3]
[B]
[B]
F-4-97
[1]
[1]
F-4-98
4-40