Removing The Pickup Solenoid; Preparation; Procedure - Canon M3010 Series Service Manual

4
Disassembly/Assembly > Pickup Feed System > Removing the Pickup Solenoid > Procedure
1) Open the Reader Unit [1] and Delivery Tray [2].
2) Remove the Pickup Roller [3].
• 2 Claws [4]
[1]
[2]
[4]
x2
4 Disassembly/Assembly > Pickup Feed System > Removing the Pickup Solenoid > Procedure

Removing the Pickup Solenoid

■ Preparation

1) Remove the Left Cover.(Refer to page 4-13)
2) Remove the Reader Unit.(Refer to page 4-20)
3) Remove the Right Cover.(Refer to page 4-14)
4) Remove the Front Cover Unit.(Refer to page 4-15)
5) Remove the Upper Cover.(Refer to page 4-15)
6) Remove the Rear Cover.(Refer to page 4-17)
7) Remove the Main Controller PCB.(Refer to page 4-34)

■ Procedure

1) Remove the Main Controller PCB Installation Plate [1].
• 1 Screw (with washer) [2]
• 2 Screws (black TP) [3]
• 1 Hook [4]
[3]
F-4-138
[1]
x3
[4]
[3]
4-55
[2]
F-4-139
4-55