Canon M3010 Series Service Manual page 75

4
Disassembly/Assembly > Original Exposure System > Removing the CIS Unit > Procedure
4) Remove the CIS Unit [3].
• 2 Shafts [2]
CAUTION:
When removing the CIS Unit [1], be sure not to lose the 2 springs [2].
[2]
[2]
4 Disassembly/Assembly > Original Exposure System > Removing the CIS Unit > Procedure
[1]
F-4-57
[3]
F-4-58
CAUTION:
• At installation, be sure to put the Flat Cable [1] through the hole [A] of the CIS Unit
Base and connect the cable to the CIS Unit [2].
• Be sure to hook the Flat Cable [1] on the 2 guides [3].
[A]
[1] [2]
• If the CIS Unit comes off, be sure to align the tooth [1] on the belt with the tooth [2]
on the bottom of the CIS Unit to install the unit.
[2]
[1]
4-27
[3]
x2
[3]
F-4-59
F-4-60
4-27