Testmode; Scan; Page Count; Scan Testmode - Canon M3010 Series Service Manual

TESTMODE

SCAN

USM Canon MF3010 USM Ver.1.01
Canon MF3010 Service Control Tool
Set up CANON MFP ( USB Service Mode)
MODE COPIER TESTMODE
STATUS
SCAN
SCAN COPY
Select Speed Mode
RGB-600 DPI
RGB-300 DPI
RGB-150 DPI
Gray-600 DPI
Gray-300 DPI
Gray-150 DPI
Mono-600 DPI
Mono-300 DPI
Mono-150 DPI
Select Speed Mode field
Select Speed Mode field
Start button
8
Service Mode > TESTMODE > SCAN
ON
Show MEMO
Connected Close
Start
Start button
F-8-12
Select a speed mode for testing.
Start test.
T-8-12
8 Service Mode > TESTMODE > SCAN
Test in progress screen

PAGE COUNT

STOP TEST
STOP TEST button
PAGE COUNT field Display the number of reading operation.
STOP TEST button Stop the test.
The test is repeated until the STOP TEST button is pressed.
The test continues until the job that was executed when the STOP TEST
button was pressed ends.
NOTE:
By pressing the STOP TEST button, the following screen appears and the machine is
waiting for completion of the test.
TESTMODE>SCAN
Description
Reading speed test
Perform the driving test of the Read Motor (M3) using the specified speed mode.
[Selection items]
RGB-600 DPI, RGB-300 DPI, RGB-150 DPI, Gray-600 DPI, Gray-300 DPI, Gray-150 DPI,
Mono-600 DPI, Mono-300 DPI, Mono-150 DPI
8-11
PAGE COUNT field
1
F-8-13
T-8-13
F-8-14
T-8-14
8-11