Type - Canon M3010 Series Service Manual

TYPE

USM Canon MF3010 USM Ver.1.01
Canon MF3010 Service Control Tool
Set up CANON MFP ( USB Service Mode)
MODE COPIER TESTMODE
Connected
STATUS
DISPLAY ADJUST FUNCTION
AMERICA(120V)
EUROPE
CHINA
AMERICA(230V)/ASIA
OCEANIA
RD
Location selection field RD button
RD button Obtain the location that has been set up.
WR button Send the settings of the selected locations to the machine.
Operation becomes possible by pressing the RD button.
Location selection field Select location group.
Operation becomes possible by pressing the RD button.
NOTE:
Even if a selected location is changed, the change is not reflected until pressing the WR
button.
8
Service Mode > COPIER > TYPE
ON
Show MEMO
Close
COUNTER TYPE TYPE
JAPAN
KOREA
INDIA
CANADA/LATIN(120V)
WR
WR button
F-8-11
T-8-10
8 Service Mode > COPIER > TYPE
Caution: When Replacing the Main Controller PCB
1) Replace the Main Controller PCB.
2) Connect the PC to this machine and start USM.
3) Display COPIER > TYPE.
4) Press the RD button, select a location, and then press the WR button.
5) Press the RD button again, and check that the correct location has been set up.
COPIER>TYPE
Description
Set the location group (report language type, basic paper size).
When replacing the Main Controller PCB, this item must be set.
[Selection items]
AMERICA(120V), CANADA/LATIN(120V), JAPAN, EUROPE, AMERICA(230V)/ASIA, OCEANIA,
INDIA, KOREA, CHINA
8-10
T-8-11
8-10