Canon M3010 Series Service Manual page 72

4
Disassembly/Assembly > Original Exposure System > Removing the Reader Motor Unit > Procedure
CAUTION:
Grease is applied on the shaft [1] of the CIS Unit, so be careful not to let the belt [2]
come in contact with the shaft.
[2]
1) Move the CIS Unit [1].
[1]
4 Disassembly/Assembly > Original Exposure System > Removing the Reader Motor Unit > Procedure
[1]
F-4-47
F-4-48
2) Move the gear [1] on the right side, and remove the belt [3] from the gear [2] on the left
side.
[1]
[2]
3) Free the harness [1] and the Grounding Wire [2] from the hole [A] of the Reader Unit and
the Harness Guide [B].
[2] [1]
4-24
[3]
F-4-49
[B]
[A]
F-4-50
4-24