Motor Driver Pcb; Before Starting The Work; Removing The Fixing Inlet Sensor Lift Motor Driver Pcb; Transceiver Pcb - Canon iR7086 Series Service Manual

Chapter 10

10.5.30 Motor Driver PCB

10.5.30.1 Before Starting the Work

iR7105 / iR7095 / iR7086
1) Remove the main controller box cover [1].
- 10 screws [2]
[1]
[2]
2) Remove the rear cover [1].
- 1 reader power supply cable [2]
- 8 screws [3]
[2]
[3]
10.5.30.2 Removing the Fixing Inlet Sensor Lift Motor
Driver PCB
iR7105 / iR7095 / iR7086
1) Remove the fixing inlet sensor lift motor driver PCB [1].
- 2 connectors [2]
- 4 screws [3]
[3]
[1]
10-26
[2]
[2]
[2]
F-10-101
[3]
[1]
F-10-102
[2]
F-10-103

10.5.31 Transceiver PCB

10.5.31.1 Before Starting the Work
0011-4918
iR7105 / iR7095 / iR7086
1) Remove the main controller box cover [1].
- 10 screws [2]
[2]
2) Remove the rear cover [1].
- 1 reader power supply cable [2]
- 8 crews [3]
[3]
[3]
3) Remove the lower left cover [1].
- 4 screws [2]
0011-4919
[3]
[3]
[2]
4) Remove the power code base [1].
- 4 screws [2]
- 4 connectors [3]
[2]
[1]
[2]
F-10-104
[3]
[2]
[1]
F-10-105
[1]
F-10-106
0011-4913
[2]
[3]