Canon M3010 Series Service Manual page 84

4
Disassembly/Assembly > Controller System > Removing the Engine Controller PCB > Procedure
6) Disconnect the 3 Flat Cables [1] and 6 connectors [2], and free the harness from the guide
[A].
[2] [A]
x9
[2] [1]
NOTE:
The following shows the routing of the removed Flat Cable [1].
4 Disassembly/Assembly > Controller System > Removing the Engine Controller PCB > Procedure
[2]
[1]
F-4-84
[1]
F-4-85
7) Remove the Engine Controller PCB [1].
• 4 Screws (with washer) [2]
• 1 Screw (with toothed lock washer) [3]
• 2 Screws (black TP) [4]
• 2 Hooks [5]
[5]
x7
[3]
[4]
[1]
[2]
[5]
[2]
[2]
4-36
F-4-86
4-36