Canon M3010 Series Service Manual page 89

4
Disassembly/Assembly > Controller System > Removing the Fixing Delivery/Paper Width Sensor PCB > Procedure
5) Free the harness [1] from the Harness Guide [A], and remove the Fixing Delivery/Paper
Width Sensor PCB [2].
• 1 Connector [3]
• 2 Claws [4]
[3] [4]
[2]
x2
NOTE:
The picture below shows how to route the harness.
4 Disassembly/Assembly > Controller System > Removing the Fixing Delivery/Paper Width Sensor PCB > Procedure
[4] [A]
[1]
F-4-99
F-4-100
CAUTION:
When installing the terminal [1], be sure that the Contact Spring [2] is in contact with it.
4-41
[1]
[2]
F-4-101
4-41