Pickup Feed System; Layout Drawing; Removing The Pickup Unit; Preparation - Canon M3010 Series Service Manual

4
Disassembly/Assembly > Pickup Feed System > Removing the Pickup Unit > Procedure

Pickup Feed System

Layout Drawing

[2]
[3]
[4]
No. Name Main Unit
[1] Pickup Unit Main Unit (Refer to page 4-51) -
[2] Pickup Solenoid Pickup Unit (Refer to page 4-55) -
[3] Pickup Roller Pickup Unit (Refer to page 4-54) -
[4] Separation Pad Pickup Unit (Refer to page 4-57) -
[5] Pickup Tray Unit Main Unit -
4 Disassembly/Assembly > Pickup Feed System > Removing the Pickup Unit > Procedure
[1]
[5]
F-4-125
Reference Adjastment during Remarks
parts replacement
-
SL1
-
-
- -

Removing the Pickup Unit

■ Preparation

1) Removing the Separation Pad.(Refer to page 4-57)
2) Remove the Left Cover.(Refer to page 4-13)
3) Remove the Reader Unit.(Refer to page 4-20)
4) Remove the Right Cover.(Refer to page 4-14)
5) Remove the Front Cover Unit.(Refer to page 4-15)
6) Remove the Upper Cover.(Refer to page 4-15)
7) Remove the Rear Cover.(Refer to page 4-17)
8) Remove the Main Controller PCB.(Refer to page 4-34)

■ Procedure

1) Remove the Main Controller PCB Installation Plate [1].
• 1 Screw (with washer) [2]
• 2 Screws (black TP) [3]
• 1 Hook [4]
x3
T-4-22
[1]
[4]
[3]
4-51
[2]
F-4-126
4-51