4
Disassembly/Assembly > Original Exposure System > Removing the Reader Unit > Procedure
Removing the Reader Unit
■ Preparation
1) Remove the Left Cover.(Refer to page 4-13)
■ Procedure
1) Remove the Grounding Wire [1].
• 1 Screw (black TP) [2]
2) Disconnect the connector [3] and the 2 Flat Cables [4].
• 1 Ferrite Core [5]
3) Remove the removed Grounding Wire [1], harness [3], and 2 Flat Cables [4] from the
Harness Guide [A].
[1]
x3
[3]
[5]
[4]
4
Disassembly/Assembly > Original Exposure System > Removing the Reader Unit > Procedure
[A]
[2]
[4]
[1]
[3]
4) Remove the Arm Shaft [1] of the Reader Unit, and lift the arm [2] of the Reader Unit.
CAUTION:
When installing the arm of the Reader Unit, be sure to insert the Arm Shaft [1] of the
Reader Unit into the Arm Shaft Rail Holder [A], and press it in the direction of the arrow.
[1]
F-4-35
[A]
[1]
4-20
[2]
F-4-36
F-4-37
4-20