Seat Support; Adjusting The Seat Width - Invacare STORM4MAX Service Manual

®
Invacare - STORM
10.2

Seat support

10.2.1 Adjusting the seat width

Note
The seat width can be adjusted by installing one of three different seat frames.
Requirements:
· Phillips screwdriver, size 2
· 6 mm Allen wrench
· 8 mm Allen wrench
·
Uninstalling the seat frame:
·
Remove the seat cushion (1).
·
Loosen both Phillips screws (3) and remove them.
·
Remove the cover plate (2).
·
Remove the actuator for the seat tilt, as described in chapter 8.14.6.
·
Remove the back part, as described in chapter 8.14.6.
4
MAX SERVICE MANUAL
121