Safety; Safety Information On Electromagnetic Compatibility; Description; Seat - Invacare Aquatec Beluga User Manual

Safety

2 Safety
2.1 Safety information
WARNING Risk of injury

▸ Do not use a faulty product.
▸ In the event of a malfunction, contact an authorized dealer
immediately.
▸ Do not make any unauthorized changes or alterations to
the product.
▸ Only use accessories intended for the Aquatec®Beluga bath
lift.
CAUTION
Risk of getting fingers caught

▸ Do not insert fingers into the guide between the seat plate
and the backrest.
2.2 Safety information on
electromagnetic compatibility
This product was successfully tested to international standards for its
electromagnetic compatibility. However, electromagnetic fields such as
those generated by radio and television transmitters, radio equipment
and mobile telephones, can influence the operation of products with
electrical drives. The electronics used in this product can also cause
weak electromagnetic disturbances but these are below the statutory
limits. You should therefore comply with the following instructions:
CAUTION Electromagnetic interference

Electromagnetic interference could cause the bath lift to stop
suddenly or (though this is extremely unlikely) to start moving
of its own accord.
▸ Switch off the external device and/or your bath lift if you
notice such behavior.
▸ If other electrically operated medical products cause a
disruption or are themselves disrupted, switch off the bath
lift and contact your authorized dealer.
3

Description

The following components are included in the scope of delivery of
the Aquatec®Beluga:

3.1 Seat

A Side flap
B Seat plate
C Hinge for backrest
D Right and left guide plate
E Lifting scissors
F Guide for the sliding shoes
G Spindle foot retainer
H Base plate
I Sliding shoe
J Front suction cups (one tab with head)
K Rear suction cups (two tabs with thread)
Beluga Bath Lift
5