Replacing Headlamp Brackets (Led Lighting System Starting 03/2012) - Invacare STORM4MAX Service Manual

SERVICE MANUAL
8.7.5

Replacing headlamp brackets (LED lighting system starting 03/2012)

Requirements:
· 4 mm Allen wrench
· Open-end wrench 8 mm
Uninstalling the tail light bracket:
·
Loosen the hexagon socket head screw (1) with a 4 mm Allen wrench and remove the
headlight from the bracket.
·
Loosen both of the nuts (2) with an 8 mm open-end wrench and remove the bracket from the
rubber mounting.
·
Replace the bracket.
Installing the headlight bracket:
·
Assemble all parts again in reverse order.
·
Tighten the screws hand-tight.
·
Check all vehicle functions.
·
Perform an approximate adjustment of the headlight using the ratchet plate as a guide. The
final adjustment
68
® 4
Invacare - STORM MAX