Opening The Front Panel - Invacare STORM4MAX Service Manual

SERVICE MANUAL
8.1.3

Opening the front panel

Requirements:
· 4 mm Allen key
Dismantling the front cover panel:
·
Remove the seat, as described in chapters 8.14.1 and 8.14.5.
·
Remove the rear and the middle covers, as described in chapter 8.1.1 and 8.1.2.
·
Loosen the two Allen screws (1) – concealed by the motor in the picture – using a 4 mm Allen
key.
·
Pull the motor cable and the guide bushes (2) out of the lateral recesses.
·
Pull the connecting cable to the seat out of the recess (3).
·
First lift the front cover up so that the retaining clips (4) are exposed.
·
Then pull the cover off towards the front.
Refitting the front panel:
·
Refit the parts in reverse order.
·
Make sure that the retaining clips (4) snap securely into the openings of the cover.
·
Now tighten all the screws finger-tight again.
40
® 4
Invacare - STORM MAX