Table of Contents
Advertisement
®
Invacare
- STORM
8.8
Front wheel forks
8.8.1
Replacing the wheel fork
WARNING: Danger of crushing!
The mobility device is very heavy. Injury hazard to hands and feet!
· You should seek help from a second person.
Injury hazard caused by uncontrolled movement of the mobility device!
· Switch the power supply off (ON/OFF key).
· Engage the drive.
· Before raising the vehicle, secure the wheels by blocking them with wedges.
Requirements:
· 19 mm socket spanner
· blade screwdriver
· long wooden blocks, min. 14 x 14 x 30 cm
Dismantling the wheel fork:
·
Prop up the wheelchair on multiple wooden blocks with the help of a second person.
·
Remove the plastic cap (1) with a screwdriver.
·
Use the 19 mm socket wrench to loosen and remove the nuts (2).
·
Pull the wheel fork (6) downwards out of the front wheel suspension (1). Pay attention to the
washers (3), spacer rings (4) and Magneto bearings (5) when doing this.
4
MAX
SERVICE MANUAL
71
Advertisement
Table of Contents
