Replacing The Tilt Actuator - Invacare STORM4MAX Service Manual

®
Invacare - STORM

8.14.6 Replacing the tilt actuator

Requirements:
· Oblique pliers
· Cable ties
Dismantling the tilt actuator:
·
Remove the l
·
egrests.
·
Pull the tilt actuator plug out of the actuator module under the seat
·
Unclip the cable. Remove any cable ties which are fitted.
·
Remove the upper pin retainer (1).
·
Remove the upper bolt (2).
·
Swing the tilt actuator (6) forwards.
·
Remove the lower pin retainer (5).
·
Remove the lower pin (4) and remove the entire tilt actuator.
·
Replace the tilt actuator.
Refitting the tilt module:
·
Refit the parts later in reverse order.
·
To conclude, check all the mobility aid functions.
4
MAX SERVICE MANUAL
105