Recording Preparations And Operations; Setting The Audio Signals - Sony SR-R1 Operation Manual

4
Chapter
Recording Preparations
and Operations
Before recording, make the following
preparations.
Recording preparations
Preparation Operation
Set the date and OTHERS >SET
time for the unit. DATE in the
SYSTEM Setup
menu
Select the format SIGNAL
signals to record. FORMAT in the
SYSTEM Setup
menu
Select the audio INPUT SEL in the
signals to record. AUDIO Setup
menu
Set the audio PHONE SEL in
signals to monitor. the AUDIO Setup
menu
Set the display METER TYPE in
range of the audio the AUDIO Setup
level meters. menu
Set the recording REC LEVEL in
levels. the AUDIO Setup
menu
Adjust the levels Rotate the LEVEL
of audio signals knob of the
output via the EARPHONES
EARPHONES jack.
jack.
Cancel record REC INHI in the
inhibit if the SYSTEM Setup
system is set to menu
record inhibit
mode.
Select the time TIMER SEL in
data to display. the TC Setup
menu
30

Recording Preparations and Operations

Recording and Playback
Reference
page 29
page 28
page 30
page 31
page 31
page 32
page 10
page 35
page 32
Preparation Operation
Set time code RUN MODE,
generator TCG MODE, and
operation in REGENE
accordance with SOURCE in the
the time code and TC Setup
user bits to record. menu
Configure the other related menu settings as
necessary.

Setting the Audio Signals

Use the AUDIO Setup menu to make settings
related to audio signals.
Press the AUDIO button to display the AUDIO
Setup menu.
To select the audio signals to record
Select the audio signal to record for each track.
1
Display the AUDIO Setup menu and
then 1 select and confirm "INPUT
SEL" t2 select and confirm the track
(TRACK1 to TRACK16) t3 select
and confirm the signal to record.
1 INPUT SEL
A U D I O S e t u p
INPUT SEL
PHONE SEL
MIX MODE RMS
REC LEVEL
PB LEVEL
METER TYPE PEAK
PEAK HOLD ON
BEEP(PHONE)
0
INPUT DELAY
SR-R1 S T O P
SDI1 to SDI16: SDI signals input via the HD
SDI IN connector A
ANA1 to ANA2: Analog signals input via
the AUDIO INPUT CH-1 and CH-2
connectors
Reference
page 33
2 Track
INPUT Select
TRACK1 AUX 1
TRACK2 AUX 2
TRACK3 AUX 3
TRACK4 AUX 4
00:00:00:00
TCR
3Signal to record