Sony SR-R1 Operation Manual page 71

Setting Item
SYSTEM FORMAT SDI OUT
Settings of signal
formats
INGEST SRExpress
SDI INGEST
PB FUNCTION IN POINT
PB CONTINUE
Settings
Sets the HD SDI OUT (MON) connectors 1/2.
1.5G SNGL [1.5G Single]: 1.5G SDI single-link output.
For dual-link format, the signal is converted to single-
link output (4:4:4 to 4:2:2, 50p to 50i, and 59.94p to
59.94i conversion).
1.5G DUAL [1.5G Dual]: 1.5G SDI dual-link output.
3G SNGL [3G Single]: 3G SDI single-link output.
Sets the unit to SRExpress file transfer mode.
ON [On]: Enables SRExpress mode.
OFF [Off]: Disables SRExpress mode.
For details on SRExpress mode, see "SRExpress Mode"
(page 47).
Tip
The "SYSTEM FORMAT" and "SDI INGEST" settings
are disabled in SRExpress mode.
Sets the unit to SDI INGEST mode.
ON [On]: Enables SDI INGEST mode.
RMT DUB [Remote Dub]: Enables SDI INGEST mode,
in addition to superimposing the SDI REMOTE signal
of the HDCAM onto the SDI OUT signal and sending
REC commands during playback that was started via a
SYNC PLAY command.
OFF [Off]: Disables SDI INGEST mode.
For details on SDI INGEST mode, see "SDI INGEST
Mode" (page 48).
Specifies time codes for setting the time data (IN points)
used for cuing.
When an IN point is set, the IN point is displayed in
"IN:XX:XX:XX:XX" format in the time data indication
of the HOME screen.
For details on cuing using IN points, see "Cuing via Time
Code Entry (IN Points)" (page 42).
Specifies whether to enable continuous playback of files.
OFF [Off]: Disables continuous playback of files (i.e.,
performs single file playback).
LIST [List]: Plays back files continuously according to
the sort sequence in the "FILE LIST."
SYSTEM Setup Menu
71