Sony SR-R1 Operation Manual page 76

Setting Item
SRMemory
SRMemory related
settings
OTHERS
76
SYSTEM Setup Menu
INFO DISP
FS LOCK
FORMAT
SOFT VERSION
HOURS METER
SET DATE
META DATA
REC TRIGGER
SDI RMT OUT
Settings
Displays SRMemory card information.
Lock setting for the SRMemory card to disable file
recording/deletion.
When the write-protect switch is WP, this setting cannot
be configured.
LOCK: Locked.
UNLOCK: Unlocked.
Formats the SRMemory card.
When the write-protect switch is WP, formatting cannot
be performed.
Note
Formatting will erase all data recorded on the SRMemory
card.
Displays the version of each software installed on the unit.
Display various count values using the digital hours meter
(total since the start of use of the unit, or total during a
certain period).
SYSTEM: System operation time
LID LOCK: Number of lock plunger operations
Sets the date and time of the unit.
For details, see "Date Settings" (page 29).
Sets 3-line metadata input.
Sets the recording start input trigger signal.
OFF [Off]: Recording is not triggered by an input signal.
SDI RMT [SDI REMOTE]: Recording is triggered by the
HDCAM's SDI REMOTE signal.
SDI R (P) [SDI RMT (Playable)]: Recording is triggered
by the HDCAM's SDI REMOTE signal.
SYNC [SYNCHRO REC]: Recording is triggered by the
PMW-F3.
SYNC (P) [SYNC REC (Playable)]: Recording is
triggered by the PMW-F3.
a)
Playback is possible. Recording start will be delayed if
a recording command is received during playback.
"SDI RMT" and "SYNC REC" at the bottom right of
the HOME screen appear light blue.
For details on connection to the PMW-F3, see
"Connection to the PMW-F3" (page 96).
Sets whether to superimpose commands from the
HDCAM's SDI REMOTE signal onto HD SDI outputs
from the unit.
OFF [Off]: Does not superimpose the SDI REMOTE
signal onto the HD SDI outputs.
ON [On]: Superimposes the SDI REMOTE signal onto
the HD SDI outputs.
For details, see "SDI REMOTE OUT" (page 59).
a)
a)