Sony SR-R1 Operation Manual page 75

Portable memory recorder
Hide thumbs Also See for SR-R1:
Table of Contents

Advertisement

Setting Item
POWER
MODE
Settings to reduce
power consumption
by limiting output
signals or restricting
use of output
connectors
POWER LED
TALLY LED
LID LED
STBY OFF
BATTERY
Settings related to the
remaining battery
power indication
Settings
Selects the output signal mode for the STOP state.
EE [EE]: Selects EE signals (input signals) for the video,
audio, and time code output.
PB [PB]: Selects the playback signal for the video, audio,
and time code output.
Select this when using the unit as a player (i.e.,
playback only device) and controlling it externally.
Controls the POWER indicator.
ON [On]: Lit normally
LOW [Low]: Dims the light
OFF [Off]: Not lit
Controls the tally lamp.
ON [On]: Lit normally
LOW [Low]: Dims the light
OFF [Off]: Not lit
Controls the LID LOCK indicator.
ON [On]: Lights normally.
LOW [Low]: Lights slightly darker.
OFF [Off]: Does not light.
Specifies the duration before entering power saving mode
(Standby Off) after entering the STOP or REC PAUSE
state (Standby Off Timer).
30sec [30sec]: Enters power saving mode after 30
seconds.
1min [1min]: Enters power saving mode after 1 minute.
2min [2min]: Enters power saving mode after 2 minutes.
5min [5min]: Enters power saving mode after 5 minutes.
10min [10min]: Enters power saving mode after 10
minutes.
20min [20min]: Enters power saving mode after 20
minutes.
40min [40min]: Enters power saving mode after 40
minutes.
60min [60min]: Enters power saving mode after 60
minutes.
DIS [Disable]: Does not enter power saving mode.
For details, see "Standby Off Mode" (page 36).
DCIN TYPE Selects the type of battery to be connected to the DC IN
connector.
AC [AC Adapter]: AC adapter
Li-ion [Li-ion Battery]: Lithium ion battery
BP-GL [BP-GL Battery]: BP-GL95
OTH1 [Others 1]
OTH2 [Others 2]
Near END
Sets the threshold voltage at which to show a near-end
(DCIN)
(almost exhausted)/warning indication for the battery
selected for the previous item "DCIN TYPE."
11.0 to 15.0 (11.9 V)
END (DCIN) Sets the threshold voltage at which to show an end
(exhausted)/warning indication for the battery selected for
the item "DCIN TYPE."
11.0 to 12.0 (11.0 V)
SYSTEM Setup Menu
75

Advertisement

Table of Contents
loading

Table of Contents