Sony SR-R1 Operation Manual page 70

Setting Item
SYSTEM FORMAT
Settings of signal
formats
70
SYSTEM Setup Menu
FRAME (TC)
SIGNAL
SELECT FPS
FPS FORMAT
ENCODE
SDI IN
Settings
When "SELECT FPS" is set to "OFF," this sets the
operation frame frequency.
When "SELECT FPS" is set to "ON," this sets the target
frame frequency (i.e., the playback frame frequency of the
created file). (In this case, the operation frame frequency
is configured in the "FPS FORMAT" setting.)
23PsF [23.97PsF]
24PsF [24PsF]
25PsF [25PsF]
29PsF [29.97PsF]
50P [50P]
59P [59P]
50i [50i]
59i [59.94i]
50ix2 [50ix2]
59ix2 [59ix2]
Sets the sampling format.
422 [422]: 4:2:2 (Y/Cb/Cr)
422 3D [422 3D]: 4:2:2 (Y/Cb/Cr) 3D
444 [444]: 4:4:4 (R/G/B)
444 3D [444 3D]: 4:4:4 (RGB) 3D
For details, see "About Recording/Playback Formats"
(page 90).
Selects the operation mode for the Select FPS function.
OFF [Off]: Disables the Select FPS function.
ON [On]: Enables the Select FPS function, and uses the
number of frames (FPS) configured on the camera.
For details, see "SR Motion" (page 49).
Selects the system format (operation frame frequency)
during Select FPS operation.
S25 [S25]
S29 [S29.97]
S50 [S50]
S59 [S59.94]
For details, see "SR Motion" (page 49)
Sets the video recording format and recording rate.
SR-SQ
SR-Lite
SR-HQ 10bit
SR-HQ 12bit
For details, see "About Recording/Playback Formats"
(page 90).
Sets inputs for HD SDI A/B.
1.5G SNGL [1.5G Single]: Inputs 1.5G single-link SDI.
1.5G DUAL [1.5G Dual]: Inputs 1.5G dual-link SDI.
3G SNGL [3G Single]: Inputs 3G single-link SDI.