About Warning Messages - Sony SR-R1 Operation Manual

Code Message Meaning
E050 MEDIA IF Cannot communicate
ERROR with the SRMemory
card.
E051 UNMOUNT An interface error
ERROR occurred when ejecting
the SRMemory card.
E052 MOUNT An interface error
ERROR occurred when
connecting the
SRMemory card to the
system.
E053 FILE Detected an SRMemory
SYSTEM ERR card file system error.
E055 VIRTUAL Detected a card that was
VOL CARD formatted in Virtual
Volume mode.
E056 SALVAGE Cannot salvage the
PROCESS SRMemory card.
E057 MEDIA Cannot format the
FORMAT SRMemory card file
system.
E058 AV WRITE Detected an audio/video
ERROR recording error due to
interface or memory
problem.
E059 AV READ Detected an audio/video
ERROR playback error due to
interface or memory
problem.
E05A WRITE FAIL Detected an access error
OW when recording an AV
file to the SRMemory
card. Proper recording is
not possible. The power
may have been turned off
before unmounting of the
card was complete.
E05B CANNOT Detected an error in the
REC MEDIA unrecorded areas of the
SRMemory card.
E05F WP OFF TO The write-protect switch
MOUNT on the SRMemory card is
set to WP. Write back for
the most recent file
system is not possible.

About Warning Messages

If an error is detected, a warning message code
appears in the operation status and warnings
section of the HOME screen (see page 13) and at
the bottom left of each Setup menu screen (model
name display).
To check the content of warning messages
Press the SELECT/ENTER dial on the control
panel. A popup window appears to display
messages for the current warnings.
Tip
Only one message is displayed at one time, even if
multiple errors and warnings occur. The number of
current errors and warnings appears at the bottom of the
popup window. Be sure to check the messages for all
errors and warnings.
Example:
Popup window displaying warning
message "W007: REC INHIBIT MODE"
(recording inhibit mode)
dB
SDI SDI SDI SDI SDI SDI SDI SDI
0
-10
WARNING
-20
-30
-60
EMP EMP EMP EMP EMP EMP EMP EMP
EE
L R L R L R L R L R L R L R L R
1 2 3 4 5 6 7 8
W007 W007
REC INHIBIT MODE REC INHIBIT MODE
PLAY LOCK
TCG LTC INTRP DF
00 00 00
H M
O Error(s)/
A001C001_120530RT
16.5V REMAIN ENCODE
SR-SQ
10min
10bit
Indicates that there are no current
error messages (see page 80).
Indicates that there are three
current warnings.
To view the other messages, rotate the
SELECT/ENTER dial on the control panel.
When a warning message appears
Take any action that may be needed to eliminate
the cause of the warning.
Error Messages and Warning Messages
SDI SDI SDI SDI SDI SDI SDI SDI
EMP EMP EMP EMP EMP EMP EMP EMP
L R L R L R L R L R L R L R L R
9 10 11 12 13 14 15 16
VTR OOOOO
EXT-LK KEYINHI
00
RECINHI
S F
MK: --:--:--:--
3 Warning(s)
LOCAL
1920x1080
EE
59.94I
4:2:2 21:46
81