Sony SR-R1 Operation Manual page 37

card will be unmounted, and the unit will
consume less power.
• By pressing the REC button during the REC
PAUSE* state, you can exit the power saving
mode and enter the REC PAUSE state. In
addition, you can press the PAUSE button to
enable mounting and recording start.
• By pressing the STOP button during the STBY
OFF state, you can perform mounting again and
enter the STOP state.
• The lid lock function will be released in
Standby Off mode, as less power is consumed
in this mode. If you eject an SRMemory card in
the REC PAUSE* or STBY OFF state, the unit
will switch to the STOP state.
Note
As starting recording or playback from Standby Off
mode requires a mounting operation, there will be a
delay before the operation starts. Before starting
recording or playback, perform Standby On operations
as necessary.
Playback Preparations and Operations
37