Sony SR-R1 Operation Manual page 63

Setting Item
CHAR ON/OFF
Settings related to the
text information
superimposed on the
3D CHAR
output from the HD
SDI OUT (MON)
connector
Note
During SINGLE
LINK output,
information is output
to HD SDI OUT
HPOS
(MON) 2 and not HD
SDI OUT (MON) 1.
VPOS
TYPE
SIZE
MODE
WARN
Settings
Sets whether or not to output text information.
ON [On]: Outputs.
OFF [Off]: Does not output.
Sets the output for displaying text information when the
system is set to 3D mode and SDI OUT is set to 1.5G
Single.
OUT1 [Out1]: Displays in HD SDI OUT (MON)
connector 1.
OUT2 [Out2]: Displays in HD SDI OUT (MON)
connector 2.
OUT1+2 [Out1+2]: Displays in HD SDI OUT (MON)
connector 1/2.
Sets the display position of text information in the
horizontal direction.
0 to 15 (8)
Sets the display position of text information in the vertical
direction.
0 to 23 (21)
Selects the character type.
W/O [Without BG]: White characters with no
background.
OUTL [Outline]: White characters with black outlines.
TRNS [Translucent]: White characters on a gray screen
background.
BG [With BG]: White characters on a black background
Sets the size of text information.
x1 [x1]: Normal
x2 [x2]: Twice normal size
Sets the content of text information.
+STAT [Time + Status]: Time counter display
information and status (operation status) information
+UB [Time + User Bit]: Time counter display information
and user bit data
+VITC [Time + VITC]: Time counter display information
and VITC
TIME [Time Only]: Time counter display information
only
+TM1 [Time + TM1]: Time counter display information
and TM1 counter value
+TM2 [Time + TM2]: Time counter display information
and TM2 counter value
When MODE is set to other than "TIME," selects whether
or not warning/error messages flash on the second line.
OFF [Off]: Does not display flashing messages.
ERR [Error]: Displays only flashing error messages.
W+E [Warn + Error]: Displays both flashing warning
messages and error messages.
63
TC Setup Menu