Sony SR-R1 Operation Manual page 73

Portable memory recorder
Hide thumbs Also See for SR-R1:
Table of Contents

Advertisement

Setting Item
TEST SG
VIDEO
Settings of test signal
output
Note
The VIDEO and
AUDIO settings are
both reset to "OFF"
AUDIO
(factory default
setting) when the
power is turned off.
LCD
LIGHT OFF
Settings of display
backlight
BRIGHT
LCD MODE
MODE COLOR
SAVER
SAVER MSG
Settings
Selects the test signal to generate with the internal video
signal generator.
OFF [Off]: Does not generate a test signal.
CB [Color Bar]: Color bar signal
SMPTE [SMPTE Color Bar]: SMPTE color bar signal
RP219 [RP-219 Color Bar]: RP-219 color bar signal
BLACK [Black]: Black signal
Selects the test signal to generate with the internal audio
signal generator.
OFF [Off]: Does not generate a test signal.
1KHz [1KHz Sine]: 1 kHz sine wave
NONE [Silence]: No sound
Sets whether or not to turn the backlight off after a set
time.
DIS [Disable]: Does not turn the backlight off.
5sec [5sec]: Turns the backlight off after 5 seconds.
10sec [10sec]: Turns the backlight off after 10 seconds.
30sec [30sec]: Turns the backlight off after 30 seconds.
1min [1min]: Turns the backlight off after 1 minute.
3min [3min]: Turns the backlight off after 3 minutes.
5min [5min]: Turns the backlight off after 5 minutes.
Sets the backlight brightness.
0 to 31 (20)
Switches between horizontal and vertical display for the
LCD.
HORIZ [Horizontal]: Horizontal display.
VERT [Vertical]: Vertical display.
Tip
You can also perform switching by pressing the FUNC +
BACK + HOME buttons. (see page 14)
Sets whether to change the background color of the
HOME screen's file name indication red during recording
and green during playback.
OFF [Off]: Disables change.
ON [On]: Enables change.
Sets whether or not to use the screensaver after a set time.
DIS [Disable]: Does not use the screensaver.
1min [1min]: Starts the screensaver after 1 minute.
3min [3min]: Starts the screensaver after 3 minutes.
5min [5min]: Starts the screensaver after 5 minutes.
10min [10min]: Starts the screensaver after 10 minutes.
20min [20min]: Starts the screensaver after 20 minutes.
30min [30min]: Starts the screensaver after 30 minutes.
1hour [1hour]: Starts the screensaver after 1 hour.
Sets the text information for the screensaver.
SYSTEM Setup Menu
73

Advertisement

Table of Contents
loading

Table of Contents