Making Superimpose Settings - Sony SR-R1 Operation Manual

Making Superimpose
Settings
Time codes, operating modes, warning/error
messages, and other text information can be
superimposed on (added to) the video signals
output from the HD SDI OUT (MON)
connectors.
Superimposed information displayed
Time data
1 2
T C R 1 2 : 3 4 . 5 6 . 0 1 *
P L A Y
A 0 0 1 C 0 0 1 _ 1 2 0 8 0
a Time data types
Symbol Meaning
TM1 Data of TM1 counter
TM2 Data of TM2 counter
TCR Time code data of LTC reader
UBR User bit data of LTC reader
TCR. Time code data of VITC reader
UBR. User bit data of VITC reader
TCG Time code data of time code generator
UBG User bit data of time code generator
b Operation mode
The information is divided into blocks A and B
and displayed as shown below.
Block A: Operating mode
Block B: Mode lock state or playback speed
A
There are the following operating mode
indications.
"SYSTEM READY"
"REC"
"REC LOCK"
"PLAY"
"PLAY LOCK"
40

Making Superimpose Settings

3 7
R 1 2 3
L O C K 1 3 . 4 V
1 3 M
4 5 6 8
B
"PLAY PAUSE"
"F.FWD"
"REW"
"UNMOUNT"
"STOP"
"MEDIA IN"
"MEDIA OUT"
"FORMAT"
"SALVAGE"
"STANDBY OFF"
c Remaining amount of recording time on
SRMemory card
d Drop frame mark of the time code
reader
" . ": When drop frame mode
" : ": When non-drop frame mode
e Drop frame mark of the time code
generator
" . ": When drop frame mode
" : ": When non-drop frame mode
f VITC field mark
" " (blank): When odd field displayed
"*": When even field displayed
g Battery voltage
Indicates the voltage of the battery or AC power
supply.
h File name
Indicates the name of the file that will be recorded
next or the name of the currently playing file.
To display warning/error messages
1
Set CHAR >MODE in the TC Setup
menu to other than "TIME."
2
Set "WARN" to "W+E" to display both
warning messages and error messages,
and set it to "ERR" to display only error
messages.
The first 16 characters of a message flash on
the second line.
T C R . 2 3 : 5 9 : 4 0 : 1 8
N O S D I
First 16 characters of a warning/error
message
I N P U T A