Panasonic AY-RP500 Installation Manual page 59

Nonlinear editing system control panel kit

Hide thumbs Also See for AY-RP500:

Table of Contents

For a MICRON PC tower type

Board spacer (metal type)

Board spacer (plastic type)

Guide rail

twist-tab wire

Pass the twist-tab wire through the guide rails as shown above.

Use the twist-tab wire to secure the board spacer to the guide rails inside the computer.

Twist the twist-tab wire and secure it properly.

Check that the board spacer has been secured properly.

Connect the ground wire to the computer's chassis only when the metal type of board spacer is supplied.

(Refer to page 11)

Table of Contents